Graco PH Pump Uživatelský manuál stáhnout pdf

DESCRIPTION

The single-acting, positive-displacement PH Manual Pump will

deliver 0.15 cubic inches (2.46 cm

) with one full stroke of the

handle. The PH Pump is available with a choice of standard clear

plastic or metal Modu-Flo

reservoirs for either oil or grease.

These reservoirs, with 5, 6, 12, and 20 pint or pound capacities,

can be mounted interchangeably atop the pump.

Modular pump/reservoir design plus built-in features (see

below) enable the PH Manual Pump to be customized for a wide

range of applications. The PH Manual Pump permits increased

standardization with resultant economies in spare parts stocking

and greater employee familiarity with plant or job site lubrication

systems.

This pump is sturdily built with aluminum and steel components

to meet the high standards of performance and quality you expect

from Graco

products. It is a compact, space-saving unit. Even

with an integrally mounted 20-pint or 20-pound capacity reservoir

and bottom-mounted optional outlet valve, it stands only 27.84

inches (70.7 cm) high, is 7.25 inches (18.4 cm) wide and 11.03

inches (28.0 cm) deep. It requires only 24.3 inches clearance

(61.7 cm) from the mounting surface for a full range of handle

pull.

The PH Manual Pump is ideal for use with Trabon

MS divider

valves or MJ divider valves on stationary equipment as well as the

E-Z Luber

Valves on many types of mobile equipment. It comes

complete with 3,000 psi gauge for easy veriﬁcation of system

operation, and a 2,500 psi automatic relief valve to protect

system components.

FEATURES/ADVANTAGES

• Built-in volume indicator provides easy veriﬁcation that

lubricant is being delivered to the system and that divider

valves are completing lube cycles.

• Interchangeable reservoirs make it convenient to expand or

contract the lube distribution system, to switch from oil to

grease or from grease to oil – without replacing the entire

system.

• Wide applicability is provided by an optional two- or four-

outlet valve that mounts under the pump outlet. This valve

allows the pump to serve up to four different systems or to

supply one or two separate manual reversing systems.

• Single-acting positive displacement pump design minimizes

the number of moving and wearing parts for extended pump

life and reduced maintenance.

• Built-in automatic relief valve protects system components

from over-pressure.

• Built-in outlet check valve prevents back pressure from

damaging pump and minimizes chance for contaminants to

get into the pump or the lube supply.

• 3,000 psi (207 bar) pressure gauge, shown in photo, provides

a fast check on system status.

PH Manual Pump

1 2 3 4

Shrnutí obsahu

Strany 1 - PH Manual Pump

DESCRIPTIONThe single-acting, positive-displacement PH Manual Pump will deliver 0.15 cubic inches (2.46 cm3) with one full stroke of the handle. The P

Strany 2 - PH Manual Pump

Trabon® PH Manual PumpPage 2 12415OPERATIONAs the pump handle (A) is pulled down, the piston (B) moves to close off the inlet (C) from the reservoir,

Strany 3

Page 3Trabon® PH Manual Pump 12415OPTIONSTwo- and Four-Outlet ValvesTwo-Outlet Valve — The two-outlet valve can be used to distribute oil or grease ei

Strany 4 - Contact us today!

6.062(153.98)4.234(107.54)5 PT./LB.3.000(76.2)BOTTOM VIEW1/4-18 NPSF LUBEOUTLET PORTVOLUME INDICATOR = 0.200 CU.IN.WHEN FULLY EXTENDED UNDERCUTON INDI