Graco 332518C Uživatelský manuál

332518CInstructionsDyna-Star® HP and HF Pump Auto-Fill® Shut Off KitUsed with Dyna-Star HP or HF Pump to fill Graco Tank/Reservoir. For automatic grea

Installation 10 332518C14. Turn on remote filling station pump (K) and fill reser-voir (F) until the indicator pin on the Auto-Fill Valve (1) pushes u

Installation332518C 11TroubleshootingProblem Cause SolutionRefilling pump, stalls. Pressurized tank is not refilling.Auto-Fill Shut Off Valve is in cl

Parts 12 332518CPartsModel 77X521 (FIG. 21)*Prior to installation, apply thread sealant or PTFE Tape to all npt tapered pipe threads.AccessoriesRemote

Technical Data332518C 13Technical Data.DimensionsAuto-Fill Shutoff Valve for Dyna-Star HP or HF PumpUS MetricMaximum working pressure 5000 psi 34.4 MP

All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves th

Warnings 2 332518CWarningsThe following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama-tion point

Auto-Fill Shut Off Overview332518C 3Auto-Fill Shut Off OverviewReference letters used in the following instructions refer to Parts Table and Drawing s

Installation 4 332518CInstallationTypical InstallationA Dyna-Star PumpB BreatherC Auto-Fill Inlet D Auto-Fill OutletE Pump Manifold / Vent Valve Inlet

Installation332518C 5DisassemblyNOTE: • Reference numbers used in the following instruc-tions refer to Kit Parts provided on the cover of this manual.

Installation 6 332518CReassemblyNOTE: • Reference numbers used in the following instruc-tions refer to Kit Parts provided on the cover of this manual.

Installation332518C 76. Install cover (e) over gasket (j) on reservoir (F) (FIG. 9). 7. Securely fasten cover (e) in place on top of reservoir (F) usi

Installation 8 332518C9. Securely fasten pump (A) to cover (e) using screws (c) and washers (d). Use a wrench to tightened securely.10. Reinstall cove

Installation332518C 9• Supply tube (3) (marked with the 16X381 alumi-num tag) and two connector fittings (5), are used for vent valve assemblies. Supp